![]() ADI Part Number : 269SN Brand Name : Honeywell Home Manufacturer : Resideo. Category : Hold-Up & Panic Buttons UPC Code : 781410473560 Country of Origin : Mexico. ![]() Any of these zone types will report to central station if reporting is enabled and the report code in the zone is properly programmed. Name : Honeywell Home 269SN V-Plex Contact Hold-Up Panic Switch, Stainless Steel. 24 Hour Auxiliary will sound the keypad, but not the siren and will display zone information. The Honeywell 269R Panic Switch is used in a variety of commercial applications from retail stores, banks and gas stations to home security applications. 24 Hour Silent will neither sound, nor show zone information on the keypad. This wireless alarm is triggered by pressing the Honeywell 269R panic button, once the button is pressed an alarm signal is transmitted to the receiver. 24 Hour Audible will sound both the siren and the keypads and will display the zone information. When programming these zones in the Vista-128BPT, choose a 24 Hour zone type, such as 24 Hour Audible (ZT 07) 24 Hour Silent (ZT 06), or 24 Hour Auxiliary (ZT 08). In the Normally Open circuit, the 2K End of Line Resistor connects across the two terminals at the last panic switch wired in the circuit. A Form C panic could be wired in either of these configurations, at your discretion.Īs you can see, in the Normally Closed configuration, the 2K End of Line Resistor connects to one side of the last panic switch in the circuit, and only one of the zone terminals. Because hardwired zones on the Vista-128BPT require an End of Line Resistor, and we're going to program our zone as a 24 hour alarm, which will activate whether the zone is shorted or opened, and whether the system is armed or disarmed, it doesn't really matter which of these types of switches we use, but I will show both Normally Open, and Normally Closed wiring. ![]() Traditionally, Normally Open switches are used for life safety devices such as smoke detectors, Normally Closed devices are used to protect openings from burglary (a normally closed sensor tied to a door that you want to remain closed just makes logical sense) and Form C devices are typically more expensive than either of the other two options and are usually not required in this situation. The first thing you must do, in this instance, is determine which type of panic switch you want to use. Hardwired panic switches can be Normally Open (NO), Normally Closed (NC), or Form C, which means they can be wired either normally open, or normally closed. To answer this question, we must first talk about panic switches in general.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |